Luminous manufacturers and share with you about the use of luminous paint spraying methods
2014-12-24 by seoer9
[
A ] should be preceded by cleaning spray coated surface , such as the
uneven surface repairs need to be coated flat ; After Judai completely
dry, and then pre- spray acrylic series of white primer paint smooth the
better . Do not demand a large area coating recommended for spraying . [
b ] is a luminous paint department , glowing stone pebbles solvent blend of
water-based paint in general and elastic coating paint fear of erosion
of the suspect , as a precautionary measure before use , please shelter
in a small area or try out when using air spray gun , can be used
directly without dilution or viscosity depending on the needs of
discretionary add spray thinner, thinner dosage should ≦ 5% is
appropriate, in order to avoid reducing their opacity .
[ C ] Each
channel between spray time 5-10 minutes is appropriate , should be
sprayed at least three of the minimum benchmark , depending on the
situation even after spraying ; fourth channel can be sprayed or more
together , with thickening of the paint film thickness its luminescent
stronger after the completion of luminous paint sprayed lacquer spray
again masterbatch production to make more beautiful luminous paint surface
using time more durable .
[ D ] to make better luminous
phosphorescent paint , proposed to be sure before spraying white primer
spray acrylic series is the bottom. After spraying the primer is
completely dry , then spray paint spraying distance please luminous
surface is coated material 15 -25 cm is appropriate, spray a thin layer
of about 5-10 minutes or so and then be sprayed a second channel .